论文部分内容阅读
Automotive torque converters have recently been designed with an increasingly narrower profile for the purpose of achieving a smaller axial size and reducing weight.Design of experiment (DOE) and computational fluid dynamics (CFD) techniques are applied to improve the performance of a fiat torque converter.Four torque converters with different flatness ratios (0.204,0.186,0.172,and 0.158) are designed and simulated first to investigate the effects of flatness ratio on their overall performance,including efficiency,torque ratio,and impeller torque factor.The simulation results show that the overall performance tends to deteriorate as the flatness ratio decreases.Then a parametric study covering six geometric parameters,namely,inlet and outlet angles of impeller,turbine,and stator is carried out.The results demonstrate that the inlet and outlet angles play an important role in determining the performance characteristics of a torque converter.Furthermore,the relative importance of the six design parameters is investigated using DOE method for each response (stall torque ratio and peak efficiency).The turbine outlet angle is found to exert the greatest influence on both responses.After DOE analysis,an optimized design for the flat torque converter geometry is obtained.Compared to the conventional product,the width of the optimized fiat torque converter torus is reduced by about 20％ while the values of stall torque ratio and peak efficiency are only decreased by 0A％ and 1.7％,respectively.The proposed new optimization strategy based on DOE method together with desirability function approach can be used for performance enhancement in the design process of flat torque converters.