The characteristics of hot electrons produced by p-polarized femtosecond laser-solid interactions are studied. The experimental results show that the outgoing e
Ni-Cr alloys with mass fraction of 1.4%-23.9 %Cr, 76.1%-98.6 % Ni, and hardness of 70.5-80.5HR were electrodeposited on aluminium substrate from the trivalent c
The relationship between the microstructure transformation of type 17-4 PH stainless steel and the aging hardening behavior was investigated. The results showed
Physicochemical characterization of commercial Pt/C and PtRu/C catalysts was carried out by X-ray diffraction,X-ray photoelectron spectroscopy, and transmission
An advanced sludge reduction process, i.e. sludge reduction and phosphorous removal process, was developed. The results show that excellent sludge reduction and
Based on the harmonic vibration equation, the relationship between IR characteristic peak of fiberglass and Si-O-Si bond angle was deduced, and 1 100 cm-1 chara
The sliding mode control problem (SMC) is studied for a class of uncertain delay system in the presence of both parameter uncertainties and external disturbance
A novel dinuclear copper complex with tetraglycol aldehyde-phenylalanine Schiff base has been synthesized. It was characterized and formulated as [Cu2L(NO3)]NO3
Large quantity of fine Ti(C,N) particles, 15-30 nm in size, were observed in low carbon hot strips added to a small amount of Ti and produced by CSP process. Th