论文部分内容阅读
《厂矿道路设计规范》规定:“在平坡或下坡的长直线段的尽头处,不应采用小半径的平曲线”。这一条规定,对于矿山总图运输设计是个很大的约束。 在矿山道路中,不论对外道路、上山道路,还是露天矿山道路,常受厂址、矿床、地形及其它各种条件的制约。因此,矿山道路路线不得不在有限的范围内选择,这给路线布设带来了很多困难。所以,在各种场地确定之后,根据工艺和运输需要,布设场(厂)
“Plant Road Design Code” states: “at the end of a long straight section of the slope or downhill, should not be used for a small radius of the flat curve.” This article stipulates that it is a big constraint for the design of mine general layout and transportation. In the mine road, regardless of the road to the outside, up the mountain road, or open pit road, often by the site, deposit, topography and other conditions. Therefore, the mine road route had to be selected within a limited range, which brought many difficulties to route layout. Therefore, after determining the various venues, according to the process and transport needs, layout field (plant)