论文部分内容阅读
切入磨削法是外圆磨床应用较多的一种磨削方法。它又称定进给磨削法、横磨法和等速切入法,见图1。磨削时,砂轮工作面上的磨粒负荷基本一致。在一次磨削循环中可分为粗磨、精磨和光磨。因为生产效率比较高,所以在大批量生产中得到了广泛地应用。但由于砂轮与工件无相对轴向运动,磨粒在工件上的切痕交错重复的机会较少,因此,加工后工件表面粗糙度差于纵向磨削法,适于加工表面为(?)7～9的范围。
Cutting into the grinding method is a more cylindrical grinder grinding method. It is also known as the feed grinding method, cross-grinding method and constant-speed method, shown in Figure 1. Grinding, abrasive wheel load on the face of the same. In a grinding cycle can be divided into coarse grinding, fine grinding and light grinding. Because of the high production efficiency, so in mass production has been widely used. However, since there is no relative axial movement of the grinding wheel and the workpiece, there is less chance of the abrasive particles crossing the workpiece repeatedly. Therefore, the surface roughness of the workpiece is worse than that of the longitudinal grinding method, which is suitable for the processing surface ~ 9 range.