论文部分内容阅读
晶体管化数字計算机的插件綫路是相当难設計的,但是安装却很簡單。这里給計算机工程帅提供几种經过考驗的插件綫路。虽然这些綫路設計規格是用在运算頻率为500千週,脈冲寬度为1微秒的部件上,但也可供設計其他計算机作为参考。这些插件綫路是美國海軍研究实驗室研究的,現介紹其中几种: 1.間歇振盪器門綫路。当用两相时鐘脈冲时它可用作动态移位寄存器、存貯寄存或延迟綫; 2.用作精確重合的“異”門綫路;
Transistor digital computer plug-in circuit is quite difficult to design, but the installation is very simple. Here to handsome computer engineering provides several proven plug-in line. Although these line design specifications are used on parts that operate at 500 kilohertz with a pulse width of 1 microsecond, other computer designs are also available for reference. These plug-in lines are the United States Naval Research Laboratory research, are presented below: 1. Intermittent oscillator gate line. It can be used as a dynamic shift register to store registers or delay lines when using two-phase clock pulses. 2. Used as an exact gate coincidence.