High signal-to-noise ratio sensing with Shack–Hartmann wavefront sensor based on auto gain control o

来源 :Chinese Physics B | 被引量 : 0次 | 上传用户:tangguorong
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
High signal-to-noise ratio can be achieved with the electron multiplying charge-coupled-device(EMCCD) applied in the Shack–Hartmann wavefront sensor(S–H WFS) in adaptive optics(AO).However,when the brightness of the target changes in a large scale,the fixed electron multiplying(EM) gain will not be suited to the sensing limitation.Therefore an auto-gain-control method based on the brightness of light-spots array in S–H WFS is proposed in this paper.The control value is the average of the maximum signals of every light spot in an array,which has been demonstrated to be kept stable even under the influence of some noise and turbulence,and sensitive enough to the change of target brightness.A goal value is needed in the control process and it is predetermined based on the characters of EMCCD.Simulations and experiments have demonstrated that this auto-gain-control method is valid and robust,the sensing SNR reaches the maximum for the corresponding signal level,and especially is greatly improved for those dim targets from 6 to 4 magnitude in the visual band. High signal-to-noise ratio can be achieved with the electron multiplying charge-coupled-device (EMCCD) applied in the Shack-Hartmann wavefront sensor (S-H WFS) in adaptive optics (AO) .However, when the brightness of the target changes in a large scale, the fixed electron multiplying (EM) gain will not be suited to the sensing limitations. agofore an auto-gain-control method based on the brightness of light-spots array in S-H WFS is proposed in this paper. The control value is the average of the maximum signals of every light spot in an array, which has been demonstrated to be kept stable even under the influence of some noise and turbulence, and sensitive enough to the change of the target brightness. value is needed in the control process and it is predetermined based on the characters of EMCCD. Simulations and experiments have demonstrated that this auto-gain-control method is valid and robust, the sensing SNR reaches the maximum for the corresponding signal level, and especially is grea tly improved for those dim targets from 6 to 4 magnitude in the visual band.
其他文献
Hilbert—Huang变换(Hilbert—Huang Transform,HHT)由美国工程院院士Huang及其合作者提出来的一种新的处理非平稳信号的方法,该方法的主要贡献是本征模态函数(Intrinsic Mode Fun
本篇硕士论文主要讨论的是采用FFT方法和Lomb—Scargle方法对模拟信号的周期进行检测。众所周知,时间序列的周期表达式对基因工程来说,意义十分重大,我们通常应用FFT算法实现对
为提高光设法解决的 potentiometric 传感器(臀部) 并且进一步的反应改进它的信号 -- 噪音比率(SNR ) ,一个光集中方法被采用。试验性的研究和理论分析表明应答的信号的大小被
我国幅员辽阔,各地区的经济发展不平衡,各个城市的发展水平也不平衡,本文选取了全国36个省会城市和计划单列市作为研究考察对象,这36个城市是我国具有战略意义的重要城市,在国家和
粗集理论是一种处理不确定和不精确性问题的新型数学工具。它是在1982年被波兰数学家Z.Pawlak首次提出的,其主要思想是在保持分类能力不变的前提下,通过知识约简,导出问题的决策
分形理论是非线性科学研究中十分活跃的一个分支,现在已被广泛应用于各个学科领域。本文主要研究时间序列的分形性质。首先,我们研究了线性和非线性多项式滤波对时间序列信号的
蒙特卡洛方法是通过不断产生随机数序列来模拟过程。它是通过产生随机数来实现的,所以计算出的问题的解存在一定的误差,所以用蒙特卡洛方法求解问题最好加入误差分析,以便可以求
样本量计算在临床试验设计或者调查中至关重要,合适的样本量可以提供合理的功效来检测临床上有显著意义的差别。为保证假设检验的结论可靠性高,常常需要一定规模的样本量。而在
为明确青春221中抗叶锈病基因的有效性及其遗传机制,以青春221为父本,分别与感病品种铭贤169和Thatcher以及小麦抗叶锈病近等基因系Lr1、Lr3和Lr23的载体品系杂交,获得F1、F2
本文是针对教育部重大项目“高校本科专业设置预测系统”中的科技人才数量预测的子问题进行研究。随着大学生数量的增加,大学生就业难的问题将日渐突出。特别是今年,金融危机渗