论文部分内容阅读
用柳条棒沾泡在汽油中的 M_1金刚砂滴在锈点或油污上,再用柳条棒加力来回擦几下即连接线路略加改接即可。连接线改接方法如下图所示,图中(A)、(C)为 XQB 系列仪表接线图,(B)、(D)为XWB 系列接线图。将 XQB 系列改为 XWB
With wicker stick soaked in gasoline in the M_1 diamond drop on the rust or oil, and then wicker stick back and forth a few times to force the connection line can be slightly modified. The connection method of the connection line is shown in the following figure. (A) and (C) are the connection diagrams of XQB series instruments. (B) and (D) are the wiring diagrams of XWB series. Change XQB series to XWB