论文部分内容阅读
故障1。一台新购486DX2/80(CVRIX TI4.0V)兼容机,主板为ALDPCI5400由于购机时未仔细验机,使用过程中出现如下故障现象:机器能正常启动,从光盘向硬盘安装软件也正常,但用软盘向硬盘安装软件或有些大型应用程序在运行过程中会出现“Writing sector notfound”或“Reading sector not found”的提示信息,此后再执行DOS命令或运行应用程序时会死机。 故障排除。一般来说,系统能自检通过,说明机器的主板没有故障,应从软故障方面查找原因。首先通过对比CMOS参数备份数据和用杀毒软件杀毒,确认
Fault 1. A new purchase of 486DX2 / 80 (CVRIX TI4.0V) compatible machine, motherboard ALDPCI5400 purchase machine without careful testing machine, the use of the process of the following symptoms: the machine can start normally, install the software from the CD to the hard disk is normal, Use a floppy disk to install the software to the hard disk or some large applications will appear in the course of running “Writing sector notfound” or “Reading sector not found” message, and then perform a DOS command or run the application will crash. Troubleshooting. In general, the system can self-test, indicating that the machine’s motherboard is not faulty, should find the reason from the soft fault. First of all, by comparing the CMOS data backup and anti-virus software antivirus, confirm