【摘 要】
：
The development of high-entropy alloys (HEAs) has stimulated an ever-increasing interest from both academia and industries.In this work,three novel MoNbFeCrV,MoNbFeCrTi,and MoNbFeVTi HEAs containing low thermal neutron absorption cross section elements we
【机 构】
：
Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education), School of Materials S
论文部分内容阅读
The development of high-entropy alloys (HEAs) has stimulated an ever-increasing interest from both academia and industries.In this work,three novel MoNbFeCrV,MoNbFeCrTi,and MoNbFeVTi HEAs containing low thermal neutron absorption cross section elements were prepared by vacuum arc melting.The microstructure,mechanical properties,and corrosion behaviors were investigated.A dominant body-centered cubic (BCC) phase was present in all these three HEAs.In addition,an ordered Laves phase was found to be another major phase in both MoNbFeCrV and MoNbFeCrTi alloys,whereas an ordered BCC (B2) phase was observed in the MoNbFeVTi alloy.The phase formation in these three alloys was discussed.It is found that the formation of the secondary phase in these alloys is mainly ascribed to the large atomic size difference and electronegativity difference.All the three HEAs show high hardness,high yield strength but limited plasticity.Moreover,the MoNbFeCrV,MoNbFeCrTi and MoNbFeVTi alloys exhibit excellent corrosion resistance in both deaerated 1 mol/L NaCl and 0.5 mol/L H2SO4 solutions at room temperature.However,further composition adjustment and/or thermomechanical processing is required to enhance the mechanical properties of the three alloys.
其他文献
Coherent second phase often exhibits anisotropic morphology with specific orientations with respect to both the second and the matrix phases.As a key feature of microstructure,the morphology of the coherent particles is essential for understanding the sec
Thin films of CdSe and silver (Ag)-doped CdSe have been prepared on glass substrates by thermal evaporation in argon gas atmosphere.X-ray diffraction pattern indicates the presence of hexagonal structure with preferred orientation along (100)plane.Element
Hydrogen dissolved in metals as a result of internal and external hydrogen can affect the mechanical properties of the metals,principally through the interactions between hydrogen and material defects.Multiple phenomena such as hydrogen dissolution,hydrog
As a kind of lightest engineering metallic materials,magnesium alloy plays significant roles in industry.The applications of magnesium alloys bring about significant benefits in the aspects of energy conservation and emissions reduction.With the issues of
Self-lubricating copper matrix composites reinforced with graphene were prepared by electroless plating and powder metallurgy.The morphology and structure of graphene,Cu@graphene powder,and Cu@graphene/Cu composites were characterized and the tribological
In this review paper,the research progress on corrosion behavior of hexagonal close-packed (HCP) singular phase,body cubic-centered (BCC) singular phase and (HCP + BCC) duplex-structured Mg-Li alloys has been summarized and reviewed,and the future trend a
Particle reinforced magnesium matrix composite (PMMC) possesses the merits of high specific strength,high specific modulus,better dimensional stability,good wear resistance and lower production cost,which is thought as a promising material in the field of
Novel crystallization behaviors of Zr55Cu30Al1oNi5 bulk metallic glass are investigated.On the one hand,mixed oxides,including CuO,CuAlO2,CuAl2O4 and ZrO2,show sequential oxidation process determined by coupling effects of specific cyclic load and tempera
The defects created in commercial dental alloys during blasting with alumina particles propelled in compressed air under pressure 0.1 and 0.4 MPa have been studied using positron annihilation spectroscopy,scanning electron microscopy and X-ray diffraction
A series of Ti2ZrHf0.5VNbx (x =0,0.25,0.5,0.75 and 1.0) refractory high-entropy alloys were prepared to investigate the alloying effect of Nb on the microstructures and mechanical properties.All the alloys displayed a simple BCC structure.The microstructu