【摘 要】
：
Pure Ni nanopowders were successfully prepared by the method of anodic arc discharged plasma with homemade experimental apparatus. The particle size, mircostruc
【机 构】
：
School of Sciences,College of Civil Engineering,School of Physical Science and Technology
论文部分内容阅读
Pure Ni nanopowders were successfully prepared by the method of anodic arc discharged plasma with homemade experimental apparatus. The particle size, mircostructure and morphology of the particles by this process were characterized via X-ray powder diffraction(XRD), transmission electron microscopy (TEM) and the corresponding selected area electron dtffraction (SAED); The specific surface area and pore parameters were investigated by multi-point full analysis of nitrogen adsorption-desorption isotherms at 77K by BrunauerEmmett-Teller (BET) surface area analyzer; The chemical composition were determined by X-ray energy dispersive spectrometry (XEDS) equipped in SEM and element analyze instrument. The experiment results indicate that the samples by this method with high purity, the crystal structure of the particles is as same as the bulk material, is fcc structure, with average particle sizes about 47nm, ranging from 20 to 70nm, and distributed uniformly inspherical chain shapes, the specific surface areavis 14.23m2/g, pore volume of pore is 0.09cm3/g and average pore diameter is 23nm.
其他文献
Intermittent shear flow including start-up flow and small oscillatory amplitude time sweep or stress relaxation after cessation of shear flow was used to study
In this paper,the Γ-equivariant (s, t)-equivalence relation and Γ-equivariant infinitesimally (r, s)-stability of Γ-equivariant bifurcation problem are defin
This paper presents an extension of a displacement discontinuity method with cracktip elements (a boundary element method) proposed by the author for fatigue cr
Dry etching of silicon is an essential process step for the fabrication of Microelectromechancal system (MEMS) The AZ7220 positive photo-resist was used as the
Carbon nanotubes (CNTs) were prepared using different carrier gases,with ferrocene as the catalyst precusor and acetylene as the carbon source. The effects of a
The Ribaucour transformations for flat Lagrangian submanifolds in Cn and CPn via loop group actions are given. As a consequence, the authors obtain a family of
Summary Granulation is a unit operation by which larger granules are produced from fine, powdery particles to improve appearance, flow properties and mixedness,
Shapes, dimensions, arrangements and the microstructure of self-assembled islands fabricated by Iow-pressure chemical vapour deposition (LPCVD) of Ge at 700℃ o