论文部分内容阅读
我们用圆镶块模锻造所示的几种非圆形锻件,模具。圆镶块模制作:先车外圆,然后在刨床上刨出8°斜面,同时刨出A面,并刨出与A面垂直的B面,再以A面、B为基准划线制作型槽,这样可以保证上、下模型槽对正。图3是在3吨模锻锤上用的圆镶块模模体。图1的锻件经生产实践证明,用上述方法制作的模具,能保证锻造过程中,锻件不产生错模。锻件质量均达到图纸要求。圆镶块模锻造非圆形锻件,所得效果和整体模一样。如果锻件形状再复杂些,只要镶块模能容纳
We use round insert block forging several of the non-circular forgings, molds shown. Round insert block mold making: the first car outside the circle, and then planing 8 ° bevel plane, while planing out A side, and planing out the A side perpendicular to the B side, and then A plane, B-based marking production Groove, so you can ensure the upper and lower mold groove alignment. Figure 3 is a 3-ton die forging hammer on the use of a round insert block body. Figure 1 forgings proved by the production practice, the mold produced by the above method, to ensure that forging process, the forging does not produce a wrong model. Forgings quality to meet the drawings requirements. Round insert block forging non-circular forgings, the resulting effect and the overall model the same. If forging more complicated shape, as long as the insert block mold can accommodate