论文部分内容阅读
塑料模具在制造过程中,为了检验模具的结构是否合理,脱模是否方便,零件是否完整,是否达到图纸要求等等,传统的方法是将做好的模具安装在注塑机上进行试模。当遇到注塑机上的塑料牌号不同时,就得更换。没有注塑机的单位,还得和外单位协作。这种试模方法造成了人力、物力上很大的浪费,因此极需要有能满足这项工艺的试模设备,以缩短制造周期和降低成本。上海新源机械厂按上海市科委下达的任务,研制成功了Y01-1试模器。经过鉴定,已达到国外同类产品的技术水平。它能方便地应用于注射成型的
Plastic mold in the manufacturing process, in order to test the structure of the mold is reasonable, whether the demoulding is convenient, the parts are complete, whether to meet the requirements of the drawings, the traditional method is to do a good job of the mold on the injection molding machine test. When faced with plastic injection molding machine different grades, you have to change. No injection molding machine units, have to work with outside units. This test method caused a lot of manpower and material resources, so it is very necessary to meet the process of test equipment to shorten the manufacturing cycle and reduce costs. Shanghai Xinyuan Machinery Factory issued by the Shanghai Science and Technology Commission under the mandate of the successful development of Y01-1 test mode. After identification, has reached the technical level of similar foreign products. It can be easily applied to injection molding