论文部分内容阅读
我修配车间是机、电、炉等设备检修、加工机械零件的车间,共配备金属切削机床49台。我们采用了SJ 型设备积时表(宁波仪表厂生产),根据该表装在机械动力设备上与主电动机的控制回路并接,一般有零线进入电器箱的设备,可以使用220伏。设备通电工作后,它就随之记录积时。投运半年来,较好地反映了实际情况,对考核设备实际运行台时有可靠数据,同时可反映出设备利用率,为保证设备定期维修保养,大修提供依据。例如,C6140车床单班使用,一级保养需运转500小时后进行保养、以前每月以25天、每天7小时进行计算,约三个月就需要进行一次一级保养工作。根据半年时间统计来看,同类机床加工量足,
I repair shop is machine, electricity, stoves and other equipment maintenance, processing machinery parts workshop, equipped with a total of 49 metal cutting machine. We use the SJ-type device plot (Ningbo Instrument Factory production), according to the table installed in the mechanical power equipment and the main motor control loop and then, there are generally zero line into the electrical box equipment, you can use 220 volts. When the device is powered on, it records the product. Put into operation in the past six months, a better reflection of the actual situation, the actual operation of the test equipment Taiwan has reliable data at the same time can reflect the equipment utilization, to ensure regular maintenance equipment, overhaul to provide the basis. For example, the C6140 lathe is used in a single shift. Maintenance of the first level needs to be carried out after 500 hours of operation. Previously, it was calculated on a 25-day basis and 7 hours a day for the first time. A first-class maintenance work was required in about three months. According to statistics of half a year, the same amount of machine tool processing,