【摘 要】
：
The feasibility to use electron beam welding to join the nominal composition Ti-48Al-2Cr-2Nb (at.%) alloy was assessed. The microstructure characterization and
【机 构】
：
National Key Laboratory of Advanced Welding Production Technology
【基金项目】
：
国家高技术研究发展计划(863计划)
论文部分内容阅读
The feasibility to use electron beam welding to join the nominal composition Ti-48Al-2Cr-2Nb (at.%) alloy was assessed. The microstructure characterization and cracking susceptibility of the joints were evaluated by means of OM,SEM, XRD, and microhardness. It was found that the welded microstructure exhibited columnar and dendritic structures.Microstructural constituents in the fusion zone were a massive gamma structure and some amount of lamellar structure consisting of alternating platelets of α2 and γ. The major contributing factor to the susceptibility to solidification cracking was microsturctural change in this study for the suppression of α phase decomposition leading to produce more retained α2 brittle phase. Compared with transgranular cleavage fracture in the base metal, the weld metal exhibited mainly translamellar fracture.
其他文献
Under the condition of equal flow, the maximum and minimum theoretical values of gap size were studied and an estimation equation was established for the clad e
The deformation behavior and the contact area of conductive particles in anisotropically conductive adhesives (ACA) were investigated by finite element method (
The fuzzy C-means clustering algorithm(FCM) to the fuzzy kernel C-means clustering algorithm(FKCM) to effectively perform cluster analysis on the diversiform st
A parametric model of cutting temperature generated in end milling process is developed according to the thermal mechanism of end milling as an intermittent ope
New method for handling roof of the base successive mining is proposed, which is induction caving in the roof. The key is that it is made certain to the station
A kind of complex additive mainly containing Al, Mg, F, and O was prepared. The synthetical performances of the property-modified prebaked anodes containing add
选择Gaussian 98大型计算化学软件包,设计了两组具有代表性的测试算例,在多种个人计算机和工作站硬件、系统软件平台上进行计算性能的综合测试、分析和评价.指出目前高端PC机
Residual fatigue strength of 48MnV crankshaft was studied and analyzed based on safety factor. Three different status crankshafts were used to the hop-up tests,
The solvent extraction of copper and zinc from the bioleaching solutions of low-grade sulfide ores with LIX984 and D2EHPA was investigated. The influences of ex
Ultrawide bandwidth (UWB) radio, a very promising technique carrying information in very short basic pulses, has properties that make it a viable candidate for