论文部分内容阅读
当添置新硬盘以后,如果不是旧硬盘物理损坏,肯定没有谁会将其扔掉,下面笔者谈谈如何让系统挂双硬盘运行。一、硬盘跳线设置给系统挂接双硬盘,首先必须按要求对硬盘进行跳线设置。最常见的方法是将双硬盘设为一主一从,通过同一根数据线接于主板的Primary IDE接口,光驱单独接于Secondary IDE接口。要注意每只硬盘的跳线不能同时设置成“Single”或
When you add a new hard drive, if not the physical damage to the old hard drive, surely no one will throw it away, the following talk about how to make the system run double hard drive. First, the hard disk jumper settings to the system dual hard drive, you must first set the hard disk jumper as required. The most common way is to set the dual-drive as master and slave, connect the Primary IDE port of the motherboard through the same data cable, and the optical drive connects to the Secondary IDE port separately. Be aware that jumpers on each drive can not be set to “Single” or both at the same time