【摘 要】
：
Previous works for achieving mechanical squeezing focused mainly on the sole squeezing manipulation method. Here we study how to construct strong steady-state mechanical squeezing via the joint effect between Duffing nonlinearity and parametric pump drivi
【机 构】
：
DepartmentofPhysics,HarbinInstituteofTechnology,Harbin150001,ChinaDepartmentofPhysics,CollegeofScien
【出 处】
：
PhotonicsResearch
论文部分内容阅读
Previous works for achieving mechanical squeezing focused mainly on the sole squeezing manipulation method. Here we study how to construct strong steady-state mechanical squeezing via the joint effect between Duffing nonlinearity and parametric pump driving. We find that the 3 dB limit of strong mechanical squeezing can be easily overcome from the joint effect of two different below 3 dB squeezing components induced by Duffing nonlinearity and parametric pump driving, respectively, without the need of any extra technologies, such as quantum measurement or quantum feedback. Especially, we first demonstrate that, in the ideal mechanical bath, the joint squeezing effect just is the superposition of the two respective independent squeezing components. The mechanical squeezing constructed by the joint effect is fairly robust against the mechanical thermal noise. Moreover, different from previous mechanical squeezing detection schemes, which need to introduce an additional ancillary cavity mode, the joint mechanical squeezing effect in the present scheme can be directly measured by homodyning the output field of the cavity with an appropriate phase. The joint idea opens up a new approach to construct strong mechanical squeezing and can be generalized to realize other strong macroscopic quantum effects.
其他文献
利用连续可调谐染料激光器,在570O～6100波长范围内测得65条铕光电流谱,其中61条为原子跃迁,4条为一价离子跃迁.
针对已有米勒矩阵测量方法的不足，提出了一种基于单光弹调制器的米勒矩阵测量技术，给出了米勒矩阵测量优化算法及系统参数两步校准法。该技术通过两步校准法对系统参数进行校准测量，利用优化算法计算得到待测样品的米勒矩阵。实验结果表明，待测1/4波片相位延迟量测量值为90.4185°，误差在标称偏差λ/300以内，快轴方位角测量值为0.2348°，误差在最大旋转误差0.4°以内。同快轴方位角为0°的1/4波片标准米勒矩阵相比，待测1/4波片米勒矩阵各元素最大相对误差的直接测量值和间接测量值分别为1.97%和0.83%
研究了微机电系统(MEMS)微构件的谐振频率等动态特性在低温环境下的变化规律，从理论上分析了改变环境温度对微悬臂梁谐振频率的影响，并对低温环境下微构件的动态特性测试技术进行了研究。研制了低温环境下MEMS动态特性测试系统，采用半导体冷阱实现低温环境，利用压电陶瓷作为底座激励装置的驱动源，通过底座的冲击激励，使微悬臂梁处于自由衰减振动状态，使用激光多普勒测振仪对微悬臂梁的振动响应进行检测，从而获得微悬臂梁的谐振频率。利用研制的测试系统，在-50 ℃~室温的环境下对单晶硅微悬臂的谐振频率进行了测试，结果表明，
为解决传统视觉式刀具测量仪采用的分段拟合方法在测量严重磨损刀刃时误差较大的问题,提出一种基于单一函数表达式的刀刃轮廓散点的整体拟合方法。首先采用改进的k-余弦曲率算法提取刀刃轮廓曲线角点,并使用最小二乘法进行分段拟合;然后确定刀刃轮廓曲线拟合目标函数的单一表达式,并在分段拟合结果的基础上,通过Levenberg-Marquardt迭代法进行非线性整体拟合。实验结果表明,整体拟合方法对严重磨损刀具测量时,能在保证目标函数曲线连续性的基础上,提高拟合精度达20%以上,这大幅度提高了刀具的测量精度及算法的稳健性
衍射光学元件具有小型化、轻量化等优点。依据传统轴棱锥的相位函数,设计了衍射轴棱锥、螺旋轴棱锥和轴棱锥阵列三种衍射光学元件的相位函数;根据角谱衍射理论,建立了平行光入射衍射光学元件的光场分析模型,数值分析了三种衍射光学元件在单色高斯激光束照射下的光场分布特性。模拟结果表明,衍射轴棱锥与传统轴棱锥相比具有相同的光束传输特性,可以在聚焦深度内产生无衍射贝塞尔光束;螺旋轴棱锥产生贝塞尔光束的阶数与拓扑电荷数相同;轴棱锥阵列可以产生无衍射贝塞尔光束阵列。所提衍射光学元件可以应用于激光加工以及成像等领域。
The dimensions of input waveguide and output waveguide of arrayed waveguide gratings (AWGs) determine the crosstalk, insertion loss and 1-dB bandwidth. In cascaded optical add/drop multiplexers (OADMs), the value of these parameters will largely affect th