【摘 要】
:
大港油田地调处与五机部256厂、六机部708所联合试制成功淤泥作业车(图1)和气垫船两种适于海滩地震作业的运载工具。经现场考核结果,其作业性能良好。淤泥作业车(PG—801)
论文部分内容阅读
大港油田地调处与五机部256厂、六机部708所联合试制成功淤泥作业车(图1)和气垫船两种适于海滩地震作业的运载工具。经现场考核结果,其作业性能良好。淤泥作业车(PG—801) 此车能在淤泥、海滩内自由行驶,可穿越海堤,其通过性能可以和由美国进口的劳力岗宽轮胎车以及从加拿大进口的道生-5型宽履带车媲美(图3)。此车除作运载工具外,还可以作为其它运载工具的牵引。该车结构简单,材料配件为国产通用件,所以维修保养方便,并可在野外拆卸和拼装。
Dagang Oilfield Reconciliation Department and 256 five plant, six 708 units jointly trial production of silt operation vehicle (Figure 1) and hovercraft are suitable for beach seismological vehicles. After field test results, its performance is good. Sludge Operation Vehicle (PG-801) This vehicle can run freely in the silt and beach and cross the seawall. Its performance is compatible with the Lorry Kong-wide tire vehicles imported from the United States and the Dawson-5 wide tracked vehicles imported from Canada Comparable (Figure 3). In addition to this car as a vehicle, but also as other vehicles, traction. The car is simple in structure, materials, accessories for the domestic common parts, so easy maintenance and removal and assembly in the field.
其他文献
The throughput (total bit per second per hertz) of a modified Proportional Fair Algorithm (PFA) is analyzed and computed. The modified PFA introduces a dynamic
Polycrystalline ZnO films were prepared on glass wafer using Zn targets by radio frequency(RF)reactive sputtering technique under different deposition condition
我们在福建省机械研究所等单位的双回路超音频感应加热设备研制成果的基础上,初步研制成功了单回路超音频感应加热设备。这两种设备中,单回路较双回路具有输出效率高,无频率
温度滴定(thermometric titration)又称量热滴定(calorimetric titration),已应用于土壤有机质及高分子电解质等的研究。水体及土壤腐植酸(HA)的溶液热化学研究中亦有应用。
我厂内球销座的生产原用高速钢样板刀车削,其质量较差,生产效率很低。现改用球座刀架,效果良好。见图1。一、结构与使用球座刀架直接装在C 620—1的四方刀架上。转动手柄7带
以色列也是个缺水的国家,其缺水程度比我国严重得多,但由于以色列极为重视节水农业的发展,先进的种植和浇灌技术大大弥补了水资源的不足。在干燥荒凉的约旦河谷,由于采用了
一、锌合金冲模的效果概述 为了适应某些数量不大,要求快上的新产品试制和中、小批量生产需要,1980年5月,我们在锌合金冲裁模上做了一些工作,并实际应用到汽车收音机零件的
《国际第五届高能加工会议文献》(Proceedings of 5th Internarional Conference of Center for High Ener 8y fabracation,Estes Pork Colora do,
Proceedings of the 5th
用量子化学近似方法,CNDO/2方案,在选取原子簇(AO)_3SiO~*HAl(OA)_2OSi(OA)_3的基础上,采用“氢键式”的吸附模型,计算了NH_3在丝光沸石位置(Ⅵ)上的吸附。结果表明:稳定吸附
一、前言 可以这样概括地说,今后热处理设备发展的动向正朝着节能、省时、减轻劳动强度这一方面发展。 为了进一步推动节能,不仅要改革目前的技术状况,并且要发展新的热处理