Improved corrosion resistance of dental Ti50Zr alloy with(TiZr)N coating in fluoridated acidic artif

来源 :稀有金属(英文版) | 被引量 : 0次 | 上传用户:petry1989
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The electrochemical corrosion behavior of the dental Ti50Zr alloy with and without nanocrystalline(TiZr)N coating was comparatively investigated in artifi-cial saliva solutions with different pH values and fluoride ion concentrations.The chemical stability of the passive films on the coated and non-coated Ti50Zr alloy was evaluated by calculating passive film thickness.The chemical compositions and valence structures of the pas-sive films were analyzed by X-ray photoelectron spec-troscopy(XPS).The results show that the(TiZr)N-coated alloy displays distinctly decreased corrosion rate and increased impedance compared with Ti50Zr alloy in non-fluoridated and fluoridated acidic solutions.Particularly,in the solution of pH=3.9 and 0.15%NaF-containing,the corrosion protection efficiency of(TiZr)N coating reaches 90%.The excellent corrosion resistance of the coated alloy is attributed to that the nanocrystallines in(TiZr)N coating decreases micropores and crack defects,which strongly impedes the corrosive ions diffusion and electrode process at Ti substrate/coating interface.Meanwhile,(TiZr)N coating shows good passivation behavior in acidic solution and active-passive transition behavior in fluoridated acidic solution.The coated Ti50Zr alloy with high chemical sta-bility has potential application prospect for dental implants.
其他文献
Thermal barrier coatings(TBCs)consisting of La2Ce2O7(LCO)and Y2O3-stabilized-ZrO2(YSZ)double-ceramic layer and Dy/Pt co-doped NiAl bond coat were produced by electron beam physical vapor deposition(EB-PVD).Thermal cyclic performance of the TBCs was evalua
A new high-pressure die-cast(HPDC)Mg-4A1-3La-lCa-0.3Mn(ALaX431)alloy with high strength has successfully been fabricated.This HPDC alloy in peak-aged state exhibits tensile yield strength(TYS)of 220 MPa at room temperature and TYS of 145 MPa at 250℃,highe
The microstructure of nickel-based single-crys-tal(SC)superalloys has a pivotal influence on their creep properties.The addition of the Re element not only enhances the long-term creep properties of nickel-based SC superalloys,but also results in the form
Magnesium hydride(MgH2),which possesses high hydrogen density of 7.6 wt%,abundant resource and non-toxicity,has captured intense attention as one of the potential hydrogen storage materials.However,the prac-tical application of Mg/MgH2 system is suffering
ZrCoCe getter films with thickness of~2.3 μm were deposited on Si(100)wafers by direct current(DC)magnetron sputtering process.A 400-nm-thick Pd protection layer was then deposited on the as-deposited ZrCoCe film without exposure to atmosphere.Microstruct
In this study,the fine-grained Mg-Li alloy was prepared by friction stir processing(FSP).The microstructure and mechanical properties of the friction-stir-processed(FSPed)Mg-Li alloy were investigated.The result showed that FSP resulted in the grain refin
Poly(vinylidenefluoride-co-hexafluoropropy-lene)(P(VDF-HFP))/Li1.3Al0.3Ti1.7(PO4)3(LATP)/P(VDF-HFP)sandwiched hybrid solid electrolytes were precisely tailored and successfully fabricated to assemble into all-solid-state lithium-ion batteries,which were s
Orthorhombic-phase Nb2O5(T-Nb2O5)has been widely investigated as an intercalation anode material for Li-ion batteries due to the larger interplanar lattice spacing and high safety.However,its applications are limited by the intrinsic low electric conducti
In this study,Alloy 718 specimens were fabri-cated via selective laser melting(SLM),and the effects of different post-treatments on microstructures and mechani-cal properties of the alloy were systematically studied.The post-treatment techniques investiga
The high phase content of inorganic dielectric fillings will give a strong electric driving force and hard matrix.That is a contradiction in enhancing the electro-deformation of dielectric elastomers(DEs).Therefore,in this paper,by focusing on how to appr