论文部分内容阅读
报道了利用带ＳＦ６气体池受激布里渊散射位相共轭Ｎｄ：ＹＡＧ激光器对０．１ｍｍ厚的刀片进行了微孔加工试验．初步实验结果表明，利用该激光器小的光束发散角这一优点，可加工出出口孔径为２０μｍ的微孔．
Reported the use of SF6 gas pool stimulated Brillouin scattering phase conjugate Nd: YAG laser on the 0.1mm thick micro-hole machining test. Preliminary experimental results show that using this laser beam divergence angle of this small advantage, can be processed out of the aperture of 20μm pore.