考虑静态稳定约束的双馈风电机组无功调节容量

来源 :电力系统自动化 | 被引量 : 0次 | 上传用户:haojian19831212
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
针对大规模风电场接入电网带来的电压无功问题,给出了双馈风电机组的功率关系,总结了双馈风电机组固有无功调节容量研究成果。分析了双馈风电机组的功角特性及静态稳定约束对双馈风电机组无功调节容量的影响,简述了电网导则可能对双馈风电机组无功调节容量的约束。在此基础之上,分析了综合考虑机组自身运行约束、静态稳定裕度和电网导则约束的双馈风电机组无功调节容量。利用实际机组参数进行仿真,结果表明,综合考虑多种约束条件能够使双馈风电机组的无功调节容量分析更接近实际情况,为双馈风电机组参与风电接入地区电网电压的调节提供理论依据。 In view of voltage reactive power brought by large-scale wind farms connected to the power grid, the power relations of doubly fed wind turbines are given, and the research results of inherent reactive power regulation of doubly-fed wind turbines are summarized. The influence of power angle characteristic and static stability constraint of doubly-fed wind turbine generator on the reactive power regulation capacity of doubly-fed wind turbines is analyzed. The constraints that the power grid guidance may have on the reactive power regulation of doubly-fed wind turbine generators are briefly discussed. On this basis, the reactive power regulation capacity of doubly-fed wind turbines considering the operation constraint of unit, static stability margin and grid guidance is analyzed. The actual unit parameters are used to simulate. The results show that the comprehensive consideration of various constraints can make the analysis of reactive power capacity of doubly-fed wind turbine closer to the actual situation and provide the theoretical basis for the doubly-fed wind turbine to participate in regulating the grid voltage of wind power access area .
其他文献
经过鲜血淋漓的文化冲突,中西文化逐渐由冲突进入和平交流时期,这种交流不仅会结出累累果实,而且也会给古老逐渐失去活力的东方文化注入新的活力,提出良性的应对挑战,从而进
我国急诊医学目前进入了体系形成时期,全国县级以上医院均建立了独立的急诊科,并形成了院前急救-医院急诊-急诊重症监护室(EICU)无缝链接的生命绿色通道.院前急救系统是否完
椎间盘源性腰痛在慢性下腰痛中常见.免疫组织化学研究发现椎间盘源性腰痛患者出现椎间盘的解剖结构紊乱,原本并无神经血管支配的纤维环内2/3区及髓核组织中发现有神经及血管
为了定量分析网络舆论导向机理与作用效果,设计了一种算法,基于社会网络分析(SNA)中的网络中心势对网络舆论导向中常见的硬控制与软控制方法进行了定量分析.以天涯论坛上的“
为合并多个本体匹配器产生的映射结果,提出一个用于本体映射协商的辩论框架.以各个匹配器的映射结果构建辩元和辩元之间的支援、反驳、联合和攻击关系,并通过判断辨元之间的
A cellular automaton model for simulating grain structure formation during solidification processes of Ti45%Al(mole fraction) alloy ingot was developed, based o
摆线齿轮存在在单齿啮合中重合度小、难以连续传动的问题.而修形齿廓摆线齿轮可以解决以上两个问题.首先,研究通过将3Z型修形齿廓摆线齿轮减速机与同型渐开线齿轮减速机在相
The two-way shape memory effect (TWSME) in a Ti36 Ni49 Hf15 high temperature shape memory alloy (SMA) was systematically studied by bending tests. In the TiNiHf
为了消除国产数控机床的早期故障,首先建立了早期故障的概念,然后从故障率浴盆曲线建模和分析入手,通过对收集的故障数据进行量化分析确定机床的早期故障期。在识别早期故障
针对飞机整体座舱骨架数控加工过程中由于复杂结构特征、初始残余应力、装夹和加工策略不当引起的加工变形问题,分析工件加工全过程的变形因素,制定防变形加工工艺方案,综合