论文部分内容阅读
定植在盆中的黑松树坯,在改作前需做好两项准备:1.对盆土扣水5～7天(以日气温在20℃上下为例)。这样可使盆土干涸凝结,在对坯桩截锯、风骨雕凿时,才不致松动盆中根蔓。2.在扣水的同时,莫需对叶面枝干喷水,这样可使桩坯枝条柔软,在使用金属丝矫形时得心应手。这棵黑松(见图1)是2004年11月中旬所得。原坯带着百把斤偏酸性板结的黄
Black pine billets planted in pots, two preparations should be made before changing them: 1. To buckle the pots soil for 5 to 7 days (take the daily temperature at 20 ℃ as an example). This can make the basin dry soil condensation, cut in the piles of sawing, Fengjiao carving, it will not loose basin root vine. 2. In the buckle at the same time, do not need to sprinkle water foliage, so that the billet can be soft branches, handy in the use of wire orthopedic. This black pine (see Figure 1) is derived from mid-November 2004. The original billet with a hundred pounds of acid yellow plate knot