【摘 要】
：
Palladium catalysts are supported on TiO2, ZrO2, Al2O3, Zr0.5Al0.5O1.75 and TiO2-Zr0.5Al0.5O1.75 prepared by co-precipitation method, re-spectively. Catalytic activities for methane and CO oxidation are evaluated in a gas mixture that simulated the exhaus
【机 构】
：
College of Chemical Engineering, Sichuan University, Chengdu 610064, Sichuan, China
论文部分内容阅读
Palladium catalysts are supported on TiO2, ZrO2, Al2O3, Zr0.5Al0.5O1.75 and TiO2-Zr0.5Al0.5O1.75 prepared by co-precipitation method, re-spectively. Catalytic activities for methane and CO oxidation are evaluated in a gas mixture that simulated the exhaust from lean-burn natural gas vehicles (NGVs). Pd/TiO2-Zr0.5Al0.5O1.75 performs the best catalytic activity among the tested five catalysts. For CH4, the light-off temperature (T50) is 254?C, and the complete conversion temperature (T90) is 280?C; for CO, T50 is 84?C, and T90 was 96?C. Various techniques, including N2 adsorption-desorption, X-ray diffraction (XRD), H2-temperature-programmed reduction (H2-TPR), X-ray photoelec-tron spectroscopy (XPS), and scanning electron microscopy (SEM) are employed to characterize the effect of supports on the physicochemical properties of prepared catalysts. N2 adsorption-desorption and SEM show that TiO2-Zr0.5Al0.5O1.75 expresses uniform nano-particles and large meso-pore diameters of 26 nm. H2-TPR and XRD indicate that PdO is well dispersed on the supports and strongly interacted with each other. The results of XPS show that the electron density around PdO and the proportion of active oxygen on TiO2-Zr0.5Al0.5O1.75 are maxima among the five supports.
其他文献
In this work, MoOx promoted Ir/SiO2 catalysts were prepared and used for the selective hydrogenolysis of tetrahydrofurfuryl alcohol (THFA) to 1,5-pentanediol in a continuous flow reactor. The effects of different noble metals (Ir, Pt, Pd, Ru, Rh), support
In an effort to reduce thermal shrinkage and improve electrochemical performance of porous polypropylene (PP) separators for lithium-ion batteries, a new composite separator is developed by introducing ceramic coated layers on both sides of PP separator t
Ni-Al hydrotalcite derived catalyst (Ni-Al2O3-HT) exhibited a narrow Ni particle-size distribution with an average particle size of 4.0 nm. Methanation of CO2 over this catalyst initiated at 225?C and reached 82.5%CO2 conversion with 99.5%CH4 selectivity
In this paper, we report on the preparation of Li2FeSiO4, sintered Li2FeSiO4, and Li2FeSiO4-C composite with spindle-like morphologies and their application as cathode materials of lithium-ion batteries. Spindle-like Li2FeSiO4 was synthesized by a facile
Although most transition metals have been tested as the promoter to Pt for electrocatalysis toward fuel cell reactions, semi-conductor elements, such as Si, have hitherto not been examined. Here we report a simple synthesis of intermetallic Pt2Si electrod
Lithium metal batteries (LMBs) of an ultrahigh theoretical energy density have attracted lots of attentions for a wide range of practical applications.However,there are still numerous challenges in LMBs system,such as poor cycling performance,complicated