论文部分内容阅读
介绍了利用MCR和活性炭过滤处理中水的工艺。工程运行结果证明，主要进水指标COD，BOD5和浊度分别为80mg／1，20mg／1和50NTU时，经过该工艺处理后，去除率可以到达88％，80％，98％，远低于《城市污水再生利用·城市杂用水水质》（GBT19923—2005）标准。
可口可乐废水中水回用处理工艺探讨
【摘 要】
：
介绍了利用MCR和活性炭过滤处理中水的工艺。工程运行结果证明，主要进水指标COD，BOD5和浊度分别为80mg／1，20mg／1和50NTU时，经过该工艺处理后，去除率可以到达88％，80％，98％，远低于《城市污水
【机 构】
：
河南省中基建筑安装工程有限公司
【出 处】
：
科技致富向导
【发表日期】
：
2004年期
其他文献
Polyelectrolyte/polyelectrolyte, organic molecule/colloidal CdS and polyelectrolyte/MWCNT films were fabricated via the layer-by-layer assembling technique. The
In this study, a new on-line health monitoring technology for the determination of the penetration of environment solution into epoxy resin was pursued. A corro
This work is aimed at investigating the online scheduling problem on two parallel and identical machines with a new feature that service requests from various c
“原生态文化”是塑造文化身份和进行文化认同的寻根活动的文化母体，但在大众文化席卷视听的当今社会，“原生态文化”在受到人们极力追捧的同时，其意义却也被大众消费文化悄然的
The rutting resistance of multilayer asphalt overlay was researched by using laboratory wheel tracking test. The effects of loading level and test temperature o
The hot deformation behavior of a KFC copper alloy was studied by compression deformation tests on Gleeble 1500 machine at strain rates ranging between 0.01-10
The structure and characteristics of CdTe thin films are closely dependent on the whole deposition process in close-space sublimation (CSS). The physical mechan
Proton Exchange Membrane Fuel Cells (PEMFCs) are the main focus of their current development as power sources because they are capable of higher power density a
Charactersitics of Stress-strain Curve of High Strength Steel Fiber Reinforced Concrete under Uniaxi
A whole of 110 specimens divided into 22 groups were tested with varying the volume fraction of steel fibers and the matrix strength of these specimens. The str
河北省太行山地区地下水资源相对缺乏,地下水化学类型成分主要受地层岩性、补给源、埋藏条件、迳流条件及人为因素的影响。该地区地下水大部分位于补给区和强迳流区,水交替作