论文部分内容阅读
在涵洞设计过程中,设计员的设计必须与实际的施工情况相结合。在施工中很多方案的提出,也是一个工程初步设计的思维来源。本文着重对常年无流水的普通涵洞设计进行探讨,给出相应的解决方法,希望能够为今后涵洞施工技术人员带来帮助。新建涵洞的设计目的和指导思想在路桥建设中,对于路面有流水经过而专门设计的横穿路堤的排水构造物被称之为涵洞,在我国很多地方修建公路设置涵洞位置时,一般都是无常年的流水通过,水流多是在雨季形成的季节性洪峰,这便要求技术人员在设计涵洞时应充分考虑洪峰时的流量,在最大流量通
During the design of a culvert, the designer’s design must be integrated with the actual construction situation. In the construction of many programs put forward, but also a source of thinking of the initial design of the project. This article focuses on the discussion of common culverts design without water flow in the year and gives corresponding solutions, hoping to help the culvert construction technicians in the future. The design purpose and guiding ideology of new culvert In the construction of road and bridge, the drainage structure crossing the embankment which is specially designed for flowing water through the pavement is called culvert. In many parts of our country, when constructing the culverts to set up the culverts, they are usually impermanence Years of running water, the water flow is mostly the seasonal peak formed in the rainy season, which requires technical staff in the design of culverts should take full account of flood peak flow at the maximum flow through