论文部分内容阅读
一次喷漆故障的处理长春第二机床厂（１３００１２）孙智兰，刘国会我厂在采用空气喷涂法对引进德国ＲＳ４５床身喷漆时，出现了底层起泡、面漆剥落的故障。分析发现，在底层与基体之间夹杂有灰白色粉状物质，它导致了底层附着力下降和面漆剥落。１原因分析原喷漆工艺过程...
A paint failure to deal with the second Changchun Machine Tool Plant (130012) Sun Zhi-lan, Liu Guohui I plant in the use of air spray method for the introduction of Germany RS45 bed painting, there was the bottom of the bubble, the peeling paint failure. Analysis found that there was an off-white powdery substance between the bottom layer and the substrate, which led to the decrease of the adhesion of the bottom layer and the peeling of the top coat. 1 reason analysis of the original painting process ...