【摘 要】
：
The influence of Ce addition on the oxidation behavior of 25Cr20Ni alloy at 950 ℃ under low oxygen partial pressure was investigated.The oxidized samples were
【机 构】
：
Departments of Materials Science and Engineering
论文部分内容阅读
The influence of Ce addition on the oxidation behavior of 25Cr20Ni alloy at 950 ℃ under low oxygen partial pressure was investigated.The oxidized samples were characterized by using X-ray diffraction (XRD),scanning electron microscopy (SEM),energy dispersive X-ray spectroscopy (EDS),and scratch tester to obtain the oxide phases,morphology,thickness,composition and adhesion property of the oxide scales.The experiment results indicated that a small amount of Ce addition (0.02 wt.％ or 0.05 wt.％) promoted oxidation resistance and inhibited the growth of the needlelike oxide.The Ce addition also decreased the formation of MnCr2O4 but promoted the SiO2 formation underneath the Cr2O3,which largely contributed to the improvement of oxide scale spallation resistance.For the sample with 0.3 wt.％ Ce addition,the oxidation rate significantly increased and the spallation resistance of the oxide scale decreased.
其他文献
The lanthana-doped mullite fibers were prepared via a sol-gel method from the aluminum isopropoxide-aluminum nitrate-tetraethyl orthosilicate system.The structu
通过搅拌铸造制备SiC纳米颗粒增强A356铝合金复合材料,并研究其显微组织和力学性能.密度测量发现试样的孔隙度较低,且孔隙度随SiC颗粒体积分数的增加而增加.通过光学显微镜和
The effect of Gd content on microstructure and magnetic properties of sintered Nd33.03-xGdxFe65.65B1.32 (x=0-2) was studied in this paper to improve the thermal
Amorphous La2Hf2O7 thin films were deposited on Si(100) substrate by pulsed laser deposition (PLD) method under different conditions.The interfacial states of t
采用铜填充金属对Ti-15-3钛合金与304不锈钢进行电子束焊接,对Ti/Fe和Ti/Cu/Fe接头在焊接过程中的温度场和应力场进行数值模拟和试验测量.结果表明,高斯旋转体热源适用于电子
An increasing {110} orientation degree behavior was observed during etching of chemical vapor deposition (CVD) diamond films by partially melting Ce-7％Fe alloys.
The objective of this study is to understand the process of fluid flow in pipe and porous media with different pore structures.High-resolution Magnetic Resonanc
通过化学氧化聚合法和胶溶法分别制备了聚噻吩(PTP)和纳米WO3,通过简单机械共混和PTP和WO3制备不同PTP质量分数的有机-无机PTP/WO3复合物.所制备的PTP/WO3复合物比纯的PTP具
使用不同成分的Zn-Al钎料对铜铝异种金属进行火焰钎焊,研究其力学性能.利用光学显微镜、扫描电镜和能谱研究不同Zn-Al钎料对Cu/Al钎焊接头钎焊性、力学性能及显微组织的影响.
针对拜耳法生产氧化铝过程中最为重要的NaAl(OH)4-NaOH-H2O体系,构建三水铝石溶解于氢氧化钠溶液的反应平衡常数的理论模型,并得出电解质NaAl(OH)4新的Pitzer模型参数和NaOH-