An integrated strategy towards the facile synthesis of core-shell SiC-derived carbon@N-doped carbon

来源 :能源化学 | 被引量 : 0次 | 上传用户:opengl100
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Porous active core-shell carbon material with excellent synergistic effect has been regarded as a prospective material for supercapacitors.Herein,we report an integrated method for the facile synthesis of carbide-derived carbon (CDC) encapsulated with porous N-doped carbon (CDC@NC) towards high-performance supercapacitors.Polydopamine (PDA) as nitrogen and carbon sources was simply coated on SiC nanospheres to form SiC@PDA,which was then directly transformed into CDC@NC via a one-step molten salt electro-etching/in-situ doping process.The synthesized CDC@NC with hierarchically porous structure has a high specific surface area of 1191 m2 g-1.The CDC core and NC shell are typical amorphous carbon and more ordered N-doped carbon,respectively.Benefitting from its unique dual porous structures,the CDC@NC demonstrates high specific capacitances of 255 and 193 F g-1 at 0.5 and 20 A g-1,respectively.The reaction mechanism of the electro-etching/in-situ doping process has also been investigated through experimental characterizations and theoretical density functional theory calculations.It is suggested that the molten salt electro-etching/in-situ doping strategy is promising for the synthesis of active core-shell porous carbon materials with synergistic properties for supercapacitors without the need for additional doping/activation processes.
其他文献
The overcharge behaviors of 1000 mAh LiCoO2/graphite pouch cells are systematically investigated through the analysis of morphology,structural and thermal stabi
作为甲醇制烯烃(MTO)调控产物分布的重要手段,催化剂积炭会改变催化剂的酸密度和平均孔径进而影响反应产物分布。基于某公司1.8×10^(6 )t/a甲醇制烯烃工业化装置,分析了催化剂定碳对反应产物分布的影响。结果表明,催化剂定碳控制在5.75%~7.00%时甲醇完全转化,此阶段随着定碳的增加,反应产物中小分子的CH4、C2H4、C2H2含量增大,大分子的C2H6
Lead-carbon hybrid capacitors are the electrochemical devices between supercapacitors and lead-acid batteries,with low prices,stability in high and low temperat
对部分干气再循环工艺(RSV)进行了模拟,处理高含CO2(2.0%~3.5%,物质的量分数)凝析气,发现乙烷回收率小于90%,且对原料气中CO2含量波动适应性差。从脱甲烷塔顶进料气质和脱甲烷塔结构两方面进行了改进,提出了部分原料气过冷乙烷回收工艺(SVFS)、两塔型部分原料气过冷乙烷回收工艺(SVFS-2T)。对SVFS-2T工艺进一步分析发现,增加原料气过冷分流比可提高吸收塔CO2冻堵裕量;而增加原料气过冷分流比、低温分离器液相分流比及降
Dion-Jacobson phase two-dimensional(DJ 2D)perovskites,recently attracting considerable interests,exhibit excellent environmental stability and structural tunability,but their solar cells still offer unsatisfactory power conversion efficiencies(PCEs).Herei
All-solid-state Z-scheme photocatalysts for overall water splitting to evolve H2 is a promising strategy for efficient conversion of solar energy.However,most o
Application of sodium-ion batteries is suppressed due to the lack of appropriate electrolytes matching cathode and anode simultaneously.Ether-based electrolytes,preference of anode materials,cannot match with high-potential cathodes failing to apply in fu
Defect-induced charge carrier recombination at the interfaces between perovskite and adjacent charge transport layers restricts further improvements in the devi
Improving the OER activity of noble metal-based materials is of profound importance to minimize the usage of noble metals and lower the cost.Here,we report cons
采用醇胺法的脱碳系统用于脱除天然气中高含的CO2,系统运行中发现溶液受到明显污染,热稳定盐含量增加、金属离子超标、设备存在一定程度的腐蚀现象。采用合适的阴离子树脂对胺液进行离子交换测试,确定了热稳定盐吸附、再生的最佳工艺条件,即吸附时间为60 min,流量为2 m3/h,再生液采用5%的NaOH溶液。胺液净化后,热稳定盐脱除率达78%,胺液颜色明显改善,同时胺液中铬离子含量也有一定程度的降低。