论文部分内容阅读
加工零件的净化是工艺流程中必不可少的一环。提高零件净化的自动化程度对大批量生产来说尤为必要,现介绍国外两种零件净化装置。 1.自动切屑分离机自动切屑分离机的结构见图1,把沾有切屑的零件放进料斗1,料斗呈倾斜放置,其升程可以调节,最大升程为20mm左右。启动电动机2通过偏心凸轮机构使料斗1发生振动,振动频率与电动机的转速有关。电动机2转动的同时也带动叶轮3旋转。通过排气管道4排出压力气流,风力的大小可以通过调节阀5进行调
Processing parts of the purification process is an essential part. Improve the degree of automation of parts purification is particularly necessary for mass production, are introduced two foreign parts purification device. 1. Automatic Chip Separator The structure of the automatic chip separator is shown in Fig. 1. The chips with the chips are placed in the hopper 1. The hopper is placed at a slant. The lift can be adjusted and the maximum lift is about 20mm. The starter motor 2 vibrates the hopper 1 through an eccentric cam mechanism, and the vibration frequency is related to the rotation speed of the motor. The rotation of the motor 2 also drives the impeller 3 to rotate. Through the exhaust pipe 4 discharge pressure air flow, the size of the wind can be adjusted by the control valve 5