论文部分内容阅读
纺车轮的保养与改装纺车轮保养淡水使用的话,不需要太仔细,用完擦干净,在轴承处加点润滑油就行,三年内没有拆开保养的必要。海水使用后必须保养,下面是总结的纺车轮保养方法:1.每次钓鱼后,先拧紧泄力装置,用淋浴喷头清洗轮子,注意水压不要太强,水温不要太高。水压太强会导致机体进水,水温太高会引起一系列物理化学反应,拧紧泄力也是防止线杯轴承刹车皮等进水。出线罗拉是重点保护部位,必
Spinning wheel maintenance and modification Spinning wheel maintenance Freshwater use, then do not need to be too careful, exhausted clean, add a little lubricant at the bearing on the line, did not open the maintenance of the need within three years. Sea water after use must be maintained, the following is a summary of the spinning wheel maintenance methods: 1. After each fishing, tighten the discharge device, wash the wheels with a shower head, pay attention to not too high pressure, water temperature is not too high. Water pressure is too strong will lead to body water, water temperature is too high will cause a series of physical and chemical reactions, tighten the tightening force is to prevent the wire cup bearing brake pads and other water. Laura is the key protection of the site, will