论文部分内容阅读
改善大多数单方向传递圆周力矩的齿轮传动的质量指标,可以应用非对称齿廓.非对称渐开线传动的分析和综合(与对称的传动相似),既可以在给定的原始母线轮廓的参数下进行,也可以不用这些参数,也就是用综合的参数.后一种研究非对称的渐开线啮合的方法很普通,当然也是更好的方法。因为它可借助于存在域来研究运动学上各种可能的传动方案。但是,现在提出的非对称齿廓(由两半不同的分布在共同的对称轴上的对称齿所组成)的研究方法(称为第一个方法),不能够充分地利用啮合的非对称性的影响.下面研究非对称啮合的另一种综合方法(称之为第二个方法).按此法,非对称齿廓是由不同的基圆直径为 d_b 和 d_b~* 展成的两条渐开线形成
Improve the quality of most gear transmissions that deliver circumferential moments in one direction and can apply asymmetrical tooth profiles Analysis and synthesis of asymmetric involute transmissions (similar to symmetrical drives), both in a given original profile of the generatrix Parameters, you can also do not have these parameters, which is the use of integrated parameters.After the study of asymmetric involute meshing method is very common, of course, is a better method. Because it can be used to study the existence of kinematics field of various possible transmission solutions. However, the proposed method of asymmetric tooth profile (consisting of two different symmetrical teeth distributed on a common axis of symmetry), now called the first one, can not make full use of the asymmetry of meshing The next study of asymmetric meshing of another synthesis method (called the second method) .According to this method, asymmetric tooth profile is composed of different basic circle diameter d_b and d_b ~ * into two Involute formation