论文部分内容阅读
擂主:郑宏斌(上海)挑战重点:一、要最大程度表现出镜片的质感和结构,要求真实不夸张。二、难度在控制镜片质感的同时兼顾镜身立体形态和质感,光比适当,不能过曝。拍摄过程:闪光灯4只柔光纸四面数码、反转片不限首先将镜头放在拍摄台上,拍摄台底部用黑色有机玻璃制造反光效果。左右两侧用柔光纸围起,各用两盏闪灯朝上45度透过柔光纸分别对镜身进行布光,镜头顶部一前一后分别布置两盏闪灯,透过柔光纸营造镜片光感。在镜头和相机间用一块反光板对镜身前部进行适当补光。
Leizhu: Zheng Hongbin (Shanghai) Challenges Focus: First, to maximize the texture and structure of the lens, requires the truth is not an exaggeration. Second, the difficulty of controlling the texture of the lens while taking into account the three-dimensional shape and texture of the mirror, the light than the appropriate, can not be over exposed. Shooting process: flash four soft paper surrounded by digital, reversal film is not limited to the first lens on the shooting stage, the bottom of the shooting stage with black plexiglass reflective effect. Left and right sides surrounded by soft paper, each with two flashing lights up 45 degrees through the soft paper were on the mirror body cloth, one after the top of the lens are arranged two flashing lights, through the soft light Paper create a sense of light lenses. Between the lens and the camera with a reflector on the front of the mirror make appropriate fill light.