论文部分内容阅读
虽然已是PⅢ的年代了,不过相信不少的朋友和我一样用的是K6-2的机子,还是AT机箱,CPU超频,加上显示卡之后,在炎热的夏天,机器会很热,加上几个小风扇散热是个好办法,但这次我介绍的是更简单、效果更好的方法。 1.只对显示卡散热。只要把机箱原来的进气口封闭或半封闭(要顾及其他设备),把显示卡主芯片所在位置的后挡板拆下,前提是对应的位置没安装其他如声卡,有的话,换个位置,把它空出来,这样你的显示卡就不会再有过热的问题了。原理是空气从机箱外通过后挡板口进入,流过显示卡进入机箱内,再通过电源的风扇排出,由于利用了电源的大功
Although it is the era of P Ⅲ, but I believe a lot of friends and I use the same K6-2 machine, or AT chassis, CPU overclocking, with the graphics card in the hot summer, the machine will be hot, plus A few small fans on the heat dissipation is a good idea, but this time I introduced a simpler, better way. 1. Only the graphics card heat. As long as the chassis of the original air inlet closed or semi-closed (to take into account other equipment), the main chip of the graphics card where the rear baffle removed, provided that the corresponding location did not install other sound card, if any, change location , Empty it out so that your graphics card will not overheat anymore. Principle is the air from the chassis through the tailgate into the mouth, through the video card into the chassis, and then discharged through the power of the fan, the power of the use of the great power