论文部分内容阅读
水压自行轮胎式深孔凿岩台车——简称水压凿岩台车。它是以水压缸代替油压缸,采用自然水压驱动液压缸来完成6个控制动作的,配上УQ100或反修100型深孔凿岩机,可打向上垂直孔和扇形孔(左右45°),孔径100毫米,经2个月的初步试验,该机性能良好,稳定可靠,深受工人欢迎。水压台车结构(见图),机长2.5米,宽1.6米,高2.6～3.5米,重2吨,配一台风马达,两个气缸,五个(打扇形孔时7个)液压缸和钻机,设计工作水压为5～15公斤/厘米~2(它是利用高位水用管道往下输送一定深度所产生的自然压头)。如实际水压偏低时,可借助压风来实现台车的控制动作。水压台车的主要优点是:利用水为控制和
Hydraulic self-tire deep hole rock drilling trolley - referred to as hydraulic rock drilling trolley. It is a hydraulic cylinder instead of hydraulic cylinder, the use of natural hydraulic pressure to drive the hydraulic cylinder to complete the six control actions, coupled with УQ100 or anti-repair 100 deep-hole rock drill, you can hit up vertical hole and fan-shaped hole (left and right 45 ° ), A hole diameter of 100 mm, after 2 months of preliminary tests, the aircraft performance is good, stable and reliable, welcomed by workers. Hydraulic trolley structure (see photo), captain 2.5 meters, 1.6 meters wide, 2.6-3.5 meters high, weighing 2 tons, with a typhoon motor, two cylinders, five (fan-shaped hole when the seven) And drilling rig, design working pressure of 5 to 15 kg / cm ~ 2 (it is the use of high water pipe down to produce a certain depth of the natural pressure head). As the actual low water pressure, can be used to achieve pressure car windlass control action. The main advantages of hydraulic trolley is: the use of water for control and