论文部分内容阅读
近年来,随着电子技术的飞速发展,数控线切割机得到了日益广泛的应用。但由于一般线切割机不具备电极丝的偏移计算机能,因此很多单位对如何只用一根纸带就能加工出一副模具的不同配合间隙的凹、凸模、固定板和卸料板的方法进行了不少探索和尝试。我厂从七○年开始也进行了这方面的工作。一九七一年,我厂试制成功了CKX-1数控线切割机,并投入使用。该机具有简易偏移计算机能。经过两年多的实际使用,证明该机器逻辑无误,使用方便。一九七三年初,随着生产形势发展的需要,我们又以原来复旦大学的逻辑为基础,本着少花钱、办
In recent years, with the rapid development of electronic technology, CNC wire cutting machine has been more widely used. However, due to the general wire cutting machine does not have the electrode offset computer, so many units on how to use only a single tape can be processed with a different mold with a gap concave, punch, fixed plate and the stripper The method has done a lot of exploration and try. I plant from 70 years have also carried out in this area. In 1971, CKX-1 CNC wire cutting machine was successfully trial-produced in our factory and put into use. The machine has a simple offset computer. After more than two years of actual use, that the machine logic is correct and easy to use. In early 1973, with the development of the production situation, based on the original logic of Fudan University,