论文部分内容阅读
故障现象是光盘送入后光驱灯亮,随后能听到摩擦声,接着光驱灯灭或长亮不息。许多人认为这是光盘大薄所致,这只说对了一小半。根本原因是光驱的夹盘机构没有产业足够的夹紧力,导致盘片转动时打滑。因为绝大多数光驱的夹盘机构为压板式(这种光驱只能平放,少数为吸盘式,可以竖放),即光盘送入光驱后,套在正对数据面的伞形轮(它会升起少许)上,然后光盘上方压板前部的塑料轮(它可以自由旋转)压住盘片,压板后面的
Failure phenomenon is the CD-ROM drive into the light after the light, then you can hear the friction noise, and then drive the light off or evergreen. Many people think this is caused by the compact disc, which is only right for a half. The fundamental reason is that the optical disc drive chucking mechanism does not have enough clamping force in the industry, causing the disc to slip when spinning. Because the vast majority of optical drive chucking mechanism for the plate (this drive can only be flat, a few sucker, you can erect), that is, after the disc into the drive, set in the data surface of the umbrella wheel Will rise a little), then the front of the disc platen plastic wheel (it can rotate freely) to suppress the platters, platen behind