论文部分内容阅读
在C1312、C1318、C1325、C1336等车床上加工长悻料时,为了保持支承,在后部立个钢管支架,棒料在管子内通过。由于工件的高速旋转,棒料强烈撞击管壁,发出刺耳的声响,从而严重地影响了工人们身体健康,造成耳鸣、头晕、烦燥等现象。以往的解决方法,是在钢管内加入钢丝骨架橡胶套,借以消除噪声,但是,由于橡胶的强度,耐磨性较差,使笼橡胶消音器很快就被损坏,经常是7天左右就要更换一次消音器,造成了很大的浪费。并且由于经常更换消音器,增加了维修工人的劳动强度,影响了设备使
In the C1312, C1318, C1325, C1336 and other lathe processing long 悻 material, in order to maintain support, stand in the back of a steel stent, bar in the pipe through. Due to the high-speed rotation of the workpiece, the bar material strongly impinges on the pipe wall and emits a jarring sound, which seriously affects the health of the workers and causes tinnitus, dizziness, irritability and so on. The previous solution is to add a steel skeleton rubber sleeve in the steel pipe to eliminate noise, however, due to the rubber strength, poor wear resistance, cage rubber muffler will soon be damaged, often about 7 days Replace the silencer, causing a lot of waste. And due to the frequent replacement of silencers, increasing the labor intensity of maintenance workers, affecting the equipment to make