Physical, Thermal and Mechanical Properties of Areca Fibre Reinforced Polymer Composites-An Overview

来源 :仿生工程学报(英文版) | 被引量 : 0次 | 上传用户:sun0603
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Areca catechu,is a species of palm belonging to the family of Arecaceae/Palmae,grows vertically,to the height of 10 m to 20 m,the stem is straight,solitary and slender,10 cm to 15 cm in diameter,with marks of annulated scars of fallen leaf sheaths.Areca fibres are predominantly extracted not only from the fruit as areca husk,but also from leaf stalks and fronds.In this review paper,areca fibre is compared with those of other representative species of the Arecaceae/Palmae family,such as the coconut tree and the palm tree,in terms of physical and mechanical properties.This review article also discusses the physical,mechanical and thermal properties of areca fibre and its composites.The review of known published data reveals that,while areca fibre has the potential to be used as an altative reinforcement in polymer composites.Besides,it has been also noticed that some other species from the family of Arecaceae/Palmae have not been explored as natural fibre reinforcement in polymer composites either,thus revealing further options of natural altative reinforcement to be investigated with regard to their potential to be used in fibre based composites for the automotive,aerospace,and construction industries.
其他文献
三维编织复合材料具有优异的力学性能,因而在航空、航天等高科技领域得到了广泛的应用和发展。三维编织复合材料力学性能研究是一个非常有意义的课题,对材料在实际工程中的应用
随着复合材料在航空航天结构构件中的地位日益重要,由于管线排布、设备检修等功能上的要求承力构件的开口问题不可回避,大开口由于其切断纤维相对较多且开口受力参与区较大,所以
水下超空泡航行体在空泡的包裹下,其所受阻力大幅度减小,航行速度实现质的飞跃,超空泡技术可使鱼雷像导弹一样在水中“飞行”。然而,超空泡技术在水下航行体减阻方面取得巨大
高应变率下材料的力学行为与准静态加载下有很大的区别。而在现代工业文明中,许多材料都工作在高应变率下,如工程爆破、穿甲弹武器、高速加工成形等。研究材料在高应变率下的
立轴式风电机组以其不需要调整风向,发电机、齿轮箱等设备放在地面上等特点,极大克服了水平轴风电机组结构上的固有缺陷,将成为新型高效大型风电机组开发的趋势。立轴式风力
随着环境问题越来越被关注,风电作为清洁能源的主要形式之一,得到了迅速的发展。但是风电出力具有随机性、波动性和间歇性的特点,对系统具有反调峰特性,并且由于风电场并网规
卫星等航天器在发射进入太空的过程中经历着非常残酷的动力学环境,为了保证发射任务的成功,以前都是针对预测的动力学环境来设计航天器使其避免在发射中破坏,这却导致了航天器结
由于变压器重达上百吨,特高压变压器甚至重达上千吨,且新的重型超高压变压器仍在研发推广中,而地震波的频率较低,方向随机性很大,传统的线性隔震器已经逐渐不能很好的满足实际需要。线性隔震器对于高频信号有很好的隔震效果,尽管借助主动隔振技术虽然能满足低频隔振的要求,但其对控制系统和环境的稳定性要求较高,且对于变压器这种“傻笨粗”的重型电气设备而言,成本高,维护和操作起来复杂。因此结合现有变压器抗震工程实际
期刊
本论文从国内外研究现状出发,将DSM与DSS(DecisionSupportSystem)相结合,面向企业管理者及省市级行政管理人员,开发采用B/S三层结构,基于J2EE架构的需求侧管理决策支持系统。