论文部分内容阅读
我厂在锻制圆形锻件中,大多采用无飞边模锻,均在摩擦压力机上进行锻制。由于圆形锻件的尺寸不同,为节省锻模钢材料、缩短制造周期和提高模具寿命,故设计制造了如下图所示的通用锻模。现介绍如下供参考。 一、通用锻模的特点。 1.此模适用于直径φ100以下的圆形锻件的无飞边模锻,通过无飞边模锻,使锻件的内外质量都有显著提高,既减少了切边工序免除了切边模的设计制造,又节省了原材料。 2.在上图中,附设了可供坯料进行镦粗
I plant forged round forgings, most of the use of flashless die forging, are forging in the friction press. Due to the different sizes of round forgings, in order to save forging steel material, shorten the manufacturing cycle and improve the life of the mold, it is designed and manufactured as shown in the following general forging die. Now introduce the following for reference. First, the characteristics of universal forging. 1. This mold is suitable for circular forging of φ100 and below without forging die forging, which improves the quality both inside and outside of the forging through dieless forging, which reduces the trimming process and eliminates the design of trimming die Manufacturing, but also save the raw materials. 2. In the picture above, attached to the blank for upsetting