安钢二炼钢罗可普连铸机达产实践

• 作 者: 张贵磊 王子亮 张殿君 刘邦军
• 机 构: 安阳钢厂,安阳钢厂,安阳钢厂,安阳钢厂,
• 出 处: 连铸
• 发表日期: 1995年01期
• 关键词: 连铸机 方坯连铸 引锭杆 罗可 漏钢 拉矫机 拉坯 凝固坯壳 连铸生产 二冷区

1 前言几年来,安钢二炼钢深入贯彻“以转炉为基础,连铸为中心,设备为保证”的指导思想,围绕实现全连铸这个核心,依靠科技进步,加强科学管理,抓关键(炉前),攻难点(连铸),保重点(方坯连铸),以人为本,以增钢为纲,从91年以来,平均每年增钢10万吨;与此同时,连铸坯(尤其是方坯)总产量大幅度提高,连铸比由91年的63.72％增加到目前的83.48％。(各项指标详见表1)

1 Foreword Over the past few years, Angang Iron and Steel II steel-depth implementation of “based on converter, continuous casting as the center, equipment to ensure that” the guiding ideology around the realization of full casting of this core, relying on scientific and technological progress, strengthen scientific management, grasp the key (Formerly in front of the furnace), tapping point (continuous casting), keeping the key point (continuous casting of billet), putting people first and taking steel as the key link, an average of 100,000 tons of steel is added every year since 1991; meanwhile, Is billet) a substantial increase in total output, continuous casting ratio increased from 63.72% in 1991 to the current 83.48%. (The indicators are shown in Table 1)