论文部分内容阅读
我国第一台65千安无隔板试验镁电解槽,于1980年12月24日投入直流电启动。启动前经过两段烘烤槽体。第一段置镍铬电热体于集镁室通以交流电,热流传至电解室时温底不低于360℃,第二段烘烤槽体,该槽灌入生产用的镁电解质,通以交流电约500千瓦小时,经4昼夜,槽内电解质温度升到730℃。 65千安无隔板侧插阴极试验镁电解槽投入试验,是在36千安同类槽型的试验基础上,对结构设计进行修改后设计安装的。试验的最初几天,从集镁室观察到镁的导出,镁的汇集等基本状况是良好的。镁汇集成大片,
China’s first 65 kA non-separator test magnesium electrolytic cell, on December 24, 1980 into direct current start. Before starting the baking tank after two sections. The first set of nickel-chromium electric body set in the magnesium chamber through the AC, heat transfer to the electrolysis room when the temperature is not less than 360 ℃, the second stage baking tank, the tank poured into the production of magnesium electrolyte, by AC about 500 kilowatt hours, after 4 days and nights, the bath electrolyte temperature rose to 730 ℃. 65 kA non-separator side inserted cathode test magnesium cell put into the test, is 36 kA similar groove on the basis of the test, the structural design of the modified design and installation. In the first few days of the experiment, it was observed that magnesium export, magnesium accumulation, and other basic conditions were good from the chamber. Magnesium together into a large,