论文部分内容阅读
薄板校正的方法很多,主要有压力矫正、拉力矫正及辊式校正等。其中以辊式校正应用最为广泛,它生产效率较高,几乎完全摆脱了手工劳动。在辊式校平机中,辊轴的节距、直径和辊数是保证板材校平质量的重要条件。在强度允许条件下,选用小直径辊轴、减小节距和增加辊数,可以加大板料拉力,使板料往复变形的次数增加,从而达到较高的校平质量。为使薄板达到较高的校平质量,又能尽量简化设备结构,我们设计了沿整形方向可
There are many ways of sheet correction, mainly pressure correction, tension correction and roll correction. One of the most widely used roll correction, its production efficiency is higher, almost completely out of manual labor. In the roller leveler, roller pitch, diameter and roller number is to ensure the quality of sheet metal leveling an important condition. Under the conditions of strength, the choice of small diameter roller, reduce the pitch and increase the number of rollers, you can increase the sheet tension, sheet reciprocating deformation increased, so as to achieve a high leveling quality. In order to make the sheet to achieve a high leveling quality, but also try to simplify the equipment structure, we have designed along the plastic direction