论文部分内容阅读
我厂在1950年已经有部分车间使用了短弧电焊。根据我厂使用的经验证明,它不但适合于厚件和不同位置的焊接,就是在薄板上(约2公厘),也会得到良好的效果。在开始推行时,由于工友用惯了薄叶皮焊条,对于短弧电焊的优点认识不够,因此在开始推行时,进行了小型示范做了多种表演,以不同的方法同样的规范用平焊、角焊、搭焊及立焊做比较,并把操作中存在的问题向大家解释清楚。这样就使工友对短弧焊接有了明确的认识,帮助大家掌握了这一技
I plant in 1950, some workshops have used a short arc welding. According to our factory experience shows that it is not only suitable for welding thick parts and different locations, is in the sheet (about 2 mm), will also be good results. At the beginning of the project, workers were not familiar with the advantages of short-arc welding due to their use of thin-skinned welding electrodes. Therefore, small-scale demonstrations were performed at the beginning of the project. Various forms of flat welding were carried out by the same method with different methods , Fillet welding, welding and welding legislation to do more, and the operation of the problems to explain to you. This will enable workers to have a clear understanding of short arc welding to help you master this technique