论文部分内容阅读
In this paper, numerical method is used to study the strain rate effect on masonry materials. A typical unit of masonry is selected to serve as a representative volume element (RVE). Numerical model of RVE is established with detailed distinctive modeling of brick and mortar with their respective dynamic material properties obtained from laboratory tests. The behavior of brick and mortar are characterized by a dynamic damage model that accounts for rate-sensitive and pressuredependent properties of masonry materials. Dynamic loads of different loading rates are applied to RVE. The equivalent homogenized uniaxial compressive strength, threshold strain and elastic modulus in three directions of the masonry are derived from the simulated responses of the RVE. The strain rate effect on the masonry material with clay brick and mortar, such as the dynamic increase factor (DIF) of the ultimate strength and elastic modulus as a function of strain rate are derived from the numerical results.
In this paper, numerical method is used to study the strain rate effect on masonry materials. A typical unit of masonry is selected to serve as a representative volume element (RVE). Numerical model of RVE is established with detailed distinctive modeling of brick and mortar The behavior of brick and mortar are characterized by a dynamic damage model that accounts for rate-sensitive and pressure dependent properties of masonry materials. Dynamic loads of different loading rates are applied to RVE. The equivalent The homogenized uniaxial compressive strength, threshold strain and elastic modulus in three directions of the masonry are derived from the simulated responses of the RVE. The strain rate effect on the masonry material with clay brick and mortar, such as the dynamic increase factor (DIF) of the ultimate strength and elastic modulus as a function of strain rate are derived from the numerical results.