论文部分内容阅读
CO2-shielded welding experiments of newly developed,780 MPa super-high strength heavy-duty truck crossbeam steel were conducted,and the microstructure,microhardness,mechanical properties,and impact toughness of the welded joint were studied.The evolution of the microstructure of the welded joint occurred as follows:welding seam(acicular ferrite+proeutectoid ferrite)→fusion zone(granular bainite-long strip M/A island)→coarse grain zone(granular bainite-long strip or short bar M/A island)→fine grain zone(ferrite+pearlite+blocky M/A island)→mixed grained zone(ferrite+granular bainite+blocky M/A island)→base metal(proeutectoid ferrite+granular bainite-blocky or granular M/A island).Increasing the density of the grain boundaries can effectively improve the impact toughness,and the blocky M/A island hindered crack propagation more effectively than the long strip M/A island.The new hot-rolled 780 MPa super-high strength steel had excellent weldability.The welding technology was applied under the following conditions:welding voltage was 20 to 21 V,welding current was 200 to 210 A,and the gas flow rate was 25 L/min.
CO2-shielded welding experiments of newly developed, 780 MPa super-high strength heavy-duty truck crossbeam steel were conducted, and the microstructure, microhardness, mechanical properties, and impact toughness of the welded joint were studied. Evolution of the microstructure of the The welded joint occurred as follows: welding seam (acicular ferrite + proeutectoid ferrite) → fusion zone (granular bainite-long strip M / A island) → coarse grain zone (granular bainite-long strip or short bar M / A island) → fine grain zone (ferrite + pearlite + blocky M / A island) → mixed grained zone (ferrite + granular bainite + blocky M / A island) → base metal (proeutectoid ferrite + granular bainite-blocky or granular M / A island) of the grain boundaries can effectively improve the impact toughness, and the blocky M / A island hindered crack propagation more effectively than the long strip M / A island. The new hot-rolled 780 MPa super-high strength steel had excellent weldability. the welding technology was appl ied under the following conditions: welding voltage was 20 to 21 V, welding current was 200 to 210 A, and the gas flow rate was 25 L / min.