论文部分内容阅读
据意大利工业联合会大理石机械分会研究中心的研究数据,意大利2013年1~6月份建筑装饰石材加工机械、刀具、装备和耗材出口金额与2012年同期相比,下降了3.5%,而2012年上半年与2011年同期相比是下降了4.1%。1各大洲市场形势2013年上半年的市场形势按区域分,与上年同期相似,北美(美国和加拿大)和欧洲这个意大利的传统地理商业市场得到了巩固。具体说,向欧洲出口金额达到1.62亿欧元,仅下降0.5%;向北美市场(美国和加拿大),出口金额为4217万欧元,同比增长25.9%;向南美市场的出口金额为8493万欧元,增长率为20.7%。总之,共向美洲出口了石材加工机械和设备以及刀具等的金额约为1.27亿欧元,南北美洲成了意大利石材技术的第二大市场。亚洲市场,共进口了意大利石材技术1.11亿欧元,同比减少了约1,500万欧元,下降约12%,而2012年同期共计进口金额为1.26亿欧元。非洲市场,进口
According to the data from the Italian Federation of Industrial Machinery Research Center for Marble Machinery, the amount of exports of construction and decoration stone processing machinery, knives, equipment and consumables dropped by 3.5% in Italy from January to June 2013, while in 2012 Half a year and compared to the same period in 2011 is down 4.1%. 1 Market Situation in All Continents The market situation in the first half of 2013 was similar to the same period of last year. North America (the United States and Canada) and Europe, the traditional geo-commercial market in Italy, have been consolidated. Specifically, exports to Europe amounted to 162 million euros, down only 0.5%; to the North American markets (the United States and Canada), exports amounted to 42.17 million euros, up 25.9%; exports to South America amounted to 84.49 million euros, an increase The rate is 20.7%. In all, a total of about 127 million euros were exported to the Americas for stone processing machinery and equipment, knives, etc. North and South America became the second largest market for Italian stone technology. In the Asian market, Italy imported 111 million euros of Italian stone technology, a decrease of approximately 15 million euros, or 12%, from a year earlier, compared with a total of 126 million euros in the same period of 2012. African markets, imports