论文部分内容阅读
一、前言降低成本和改善并保证质量是市场所鼓励的,因而要进一步发展轧制技术。目前,通过具有闭环控制回路的液压调节系统来控制整个带卷长度上的厚度公差,已是确定的工艺操作状态。但是,由于设计的限制,理想轧制技术的应用(如使用小的轧辊直径)还是不如意的,在很多情况下没有足够的决窍。尽管如此,降低成本和改善质量需要能完全汇集轧制过程的所有优点的新
I. INTRODUCTION Lowering costs and improving and ensuring quality are encouraged by the market, so further rolling technology is needed. At present, controlling the thickness tolerance over the length of a coil by a hydraulic regulating system with a closed-loop control loop has been the established process operating state. However, due to design constraints, the application of ideal rolling technology (such as the use of small roll diameter) is still not satisfactory, in many cases not enough know-how. In spite of this, reducing costs and improving quality requires a completely new combination of all the advantages of the rolling process