论文部分内容阅读
Under normal water chemistry conditions, the oxygen and hydrogen peroxide produced by water radiolysis in the coolant of boiling water reactors(BWRs) can lead to intergranular stress corrosion cracking in the constituent materials of plant components. This fact has led to the wide-scale adoption of hydrogen water chemistry(HWC) in the nuclear industry to counteract these effects.This study seeks to characterize the metallic composition and the surface properties of the constituent materials of plant components in order to determine their effects on the accumulation of chalk river unidentified deposits(crud) on fuel rods in the BWR Unit-1 of the Kuosheng Nuclear Power Plant in Taiwan. Inductively coupled plasma-atomic emission spectroscopy was used to calculate the concentrations of surface crud and gamma spectrometry was used to determine the radioactivity of the corrosion products, as well as their axial distribution across the surface of the fuel rods. X-ray diffraction analysis and scanning electron microscopy/energy-dispersive X-ray spectroscopy were used to identify the crystalline phase and morphology of the crud as irregular shapes and flakes. The amount of crud deposited during the fourth fuel cycle exceeded that of the third fuel cycle due to extended burn-up time. Our analytical results indicate that the implementation of HWC had no significant effect on the characteristics of subsequent crud.
Under normal water chemistry conditions, the oxygen and hydrogen peroxide produced by water radiolysis in the coolant of boiling water reactors (BWRs) can lead to intergranular stress corrosion cracking in the constituent materials of plant components. This fact has led to the wide-scale adoption of hydrogen water chemistry (HWC) in the nuclear industry to counteract these effects. This study seeks to characterize the metallic composition and the surface properties of the constituent materials of plant components in order to determine their effects on the accumulation of chalk river unidentified deposits ( crud) on fuel rods in the BWR Unit-1 of the Kuosheng Nuclear Power Plant in Taiwan. Inductively coupled plasma-atomic emission spectroscopy was used to calculate the concentrations of surface crud and gamma spectrometry was used to determine the radioactivity of the corrosion products, as well as their axial distribution across the surface of the fuel rods. X-ray diffraction analysis and scanning electron microscopy / energy-dispersive X-ray spectroscopy were used to identify the crystalline phase and morphology of the crud as irregular shapes and flakes. The amount of crud deposited during the fourth fuel cycle exceeded that of the third fuel cycle due to extended burn -up time. Our analytical results indicating that the implementation of HWC had no significant effect on the characteristics of subsequent crud.