【摘 要】
：
An empirical expression of cohesion (C) and friction angle (φ) for layered rock was suggested. This expression was compared with a test result made by the form
【机 构】
：
Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, China
论文部分内容阅读
An empirical expression of cohesion (C) and friction angle (φ) for layered rock was suggested. This expression was compared with a test result made by the former researchers. The constitutive relationship of a transversely isotropic medium and Mohr-Coulomb criterion in which C and φ vary with directions were employed, and a relative 3D elasto-plastic FEM code was developed, in which the important thing was to adopt a search-trial method to find the orientation angle (p) of shear failure plane (or weakest shear plane) with respect to the major principal stress as well as the corresponding C and φ. Taking an underground opening as the calculation object, the numerical analyses were carried out by using the FEM code for two cases of transversely isotropic rock and isotropic rock, respectively, and the computation results were compared. The results show that when the rock is a transversely isotropic one, the distributions of displacements, plastic zones and stress contours in the surrounding rock will be non-axisymmetric along the tunnel’s vertical axis, which is very different from that of isotropic rock. The stability of the tunnel in transversely isotropic rock is relatively low.
其他文献
针对并联式混合动力电动汽车的能量控制问题进行了研究,提出了一种多模式能量管理策略。建立了整车模型,以负载力矩、电池荷电状态(SOC)和车速作为控制依据设计了多个工作模
为进一步改善移动式电化学光整加工的整平效果,依据实际工作中工件阳极与工具阴极的表面微观几何轮廓特性,对电化学光整加工(Electrochemical finishing,ECF)中的误差复制效
In this work,a model of gas leakage through nonmetallic gaskets was developed in order to predict leakage rate of gasket sealing connections. The model was veri
A feature extraction and fusion algorithm was constructed by combining principal component analysis (PCA) and linear discriminant analysis (LDA) to dctect a fau
To solve the seam tracking problem of mobile welding robot, a new controller based on the dynamics of mobile welding robot was designed using the method of back
V-type ultrasonic linear motor fabricated using a simple punching technique was proposed to utilize as an actuator of small precision machine. The stator of the
A reconstruction technology of finite element meshes based on reversal engineering was applied to solve mesh penetration and separation in the finite element si
In worldwide, the most common triggering factor of rock landslides is extended and intense rainfall. However, different from the soil slope failure caused by so
A novel maglev transportation system was proposed for large travel range ultra precision motion. The system consists of a levitation subsystem and a propulsion
A new coarse-grained differentiated least interference routing algorithm (CDLI) with DiffServ-Aware was presented. This algorithm is composed of off-line and on