Spur Gear Tooth Pitting Propagation Assessment Using Model-based Analysis

• 作 者: Xi-Hui Liang Zhi-Liang Liu Jun Pan Ming Jian Zuo
• 机 构: Department of Mechanical Engineering, University of Alberta, Edmonton T6G 1H9, Canada;School of Mech
• 出 处: 中国机械工程学报
• 发表日期: 2017年6期
• 关键词: Mesh stiffness Mesh damping Gear dynamics Vibration Statistical feature Dynamic

Tooth pitting is a common failure mode of a gearbox.Many researchers investigated dynamic properties of a gearbox with localized pitting damage on a single gear tooth.The dynamic properties of a gearbox with pitting distributed over multiple teeth have rarely been investigated.In this paper,gear tooth pitting propagation to neighboring teeth is modeled and investigated for a pair of spur gears.Tooth pitting propagation effect on time-varying mesh stiffness,gearbox dynamics and vibration characteristics is studied and then fault symptoms are revealed.In addition,the influence of gear mesh damping and environmental noise on gearbox vibration properties is investigated.In the end,114 statistical features are tested to estimate tooth pitting growth.Statistical features that are insensitive to gear mesh damping and environmental noise are recommended.