论文部分内容阅读
1.电气有无故障的检查方法这种秤是一种机电结合的电子秤,当出现故障后,应首先分出是机械的故障,还是电气故障,才能对症下药. 检查方法如下:接通电源后,字码管各位数均有显示。当秤稳定后,按一下“复0”键,各位显示则为“0”。打开计量箱后门,用手按动传力杠杆,上下大幅度的按动数次,即使摆锤摆动数次,然后停止按动,将手拿开。稳定后各位显示应均为“0”(最低位数有可能差1~2个数,也为正常)。因为,当外力去掉后,摆锤应回到起始位置。那么,可
1. There is no faulty electrical inspection method This scale is a combination of electromechanical electronic scales, when a fault occurs, you should first separate the mechanical fault, or electrical fault, to the right medicine.Check as follows: After the power is turned on , The number of digits of the tube are displayed. When the scale is stable, click the “complex 0” key, you display “0”. Open the back door of the metering box, press the power transmission lever with your hand, and press it up and down a few times. Even if the pendulum swings several times, then stop pressing and release the hand. After the stability of the display should be “0” (the lowest possible number of poor 1-2, is also normal). Because, when the external force is removed, the pendulum should be returned to the starting position. Well, yes